The RT4505 is a maximum 4MHz frequency synchronous Boost converter plus a 1.5A constant current driver for a high current white LED. The high-side current source allows for grounded cathode LED operation providing flash current up to 1.5A. An adaptive regulation method ensures the current source remains in regulation and maximizes efficiency.

The RT4505 is controlled via an I2C-compatible interface. Features include a hardware flash enable (STROBE) allowing a logic input to trigger the flash pulse as well as a TX input which forces the flash pulse into a low current, allowing for synchronization to RF power amplifier events or other high-current conditions.

The maximum 4MHz switching frequency, over-voltage protection and adjustable current limit settings allow the use of tiny, low-profile inductors and ceramic capacitors. The device is available in a small WL-CSP-9B 1.3x1.37 (BSC) package, and operates within the -40°C to 85°C temperature range.

应用

Camera Phone LED Flash

关键特性

1.5A High-Side Current Source for Single LED

Up to 90% Efficiency in Torch Mode and Flash Mode

Typical 5% LED Current Accuracy

Typical 7.5% Timeout Accuracy

Programmable Flash LED Current from 93.74mA to 1.5A

Programmable Torch LED Currents from 49.6mA to 375mA

Built-In Soft-Start Operation for Battery Protection

Built-In Over-Voltage Protection, Over-Current Protection, and Over-Temperature Protection

VIN Flash Monitor Optimization

Hardware Strobe Enable

Synchronization Input for RF Power Amplifier Pulse Events

400KHz I2C Control Interface

9-Ball WL-CSP Package

RoHS Compliant and Halogen Free