The TP600X series are CMOS single, dual, quad opamps with RRIO, low offset, low power and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth, 0.7 V/μs slew rate, and low distortion while drawing only 80 μA of quiescent current per amplifier. The common-mode input voltage range extends 100 mV beyond V− and V+, and the outputs swing rail-to-rail. The TP600X family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve the input/output range and performance.

The combination of features makes the TP600X an ideal choice for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in singlesupply systems.

Features

 Supply Voltage: 2.1 V to 6.0 V

 Low Supply Current: 80 μA per channel

 Rail to Rail Input and Output

 Bandwidth: 1 MHz

 Slew Rate: 0.7 V/μs

 Excellent EMI Suppress Performance

 Offset Voltage: ±3 mV Maximum

 Offset Voltage Temperature Drift: 2 μV/°C

 Low Noise: 27 nV/√Hz at 1 kHz

 High Output Capability: 100 mA

 −40°C to 125°C Operation Temperature Range

Applications

 Active Filters, ASIC Input or Output Amplifier

 Sensor Interface

 Smoke/Gas/Environment Sensors

 Portable Instruments and Mobile Device